fbpx

Shop

Helder Arcylic Wall Primer
HELDER Acrylic Wall Primer
January 8, 2022
Helder Wall Putty Plus
Helder Interior Exterior Wall Putty Plus
January 8, 2022

Helder Interior, Exterior Paint Plus

Helder Interior, Exterior Paint Plus is excellent quality emulsion wall paint with long-lasting properties. It is specially developed for both Interior and Exterior surfaces

Interior Surface:  Kitchen, Bathrooms, Rooms, underground basement.

Exterior Surface:  Outside walls, Facade, Hotel, etc.

 

Application System

1 X Coat Helder Wall Primer

1 X Coat Helder Wall Putty

2 X Coats Helder Interior, Exterior Paint Plus

 

TECHNICAL INFORMATION

(Depends on temp., Humidity, Air movements, and Film thickness)

Drying Time:             2-3 hours for each coat

Coverage:                  10-14 m2/Liter/coat

Mixing:                       Clean Water

No. of Coats:             1-2

Apply with:                Brush, Roller, or Spray

Cleaning:                    Clean all the equipment’s with water

Category:
Description

HEALTH AND SAFETY ENVIRONMENT INFORMATION

Keep the container tightly closed and upright to prevent leakage when not in use. Don’t breathe in vapors and sand dust. Cartridge Mask Should be worn when rubbing down. Provide adequate ventilation during application and drying. If you experience difficulty in breathing, move to fresh air. Don’t permit smoking in the vicinity. Avoid contact with eyes and skin. Wear gloves and goggles during application or sanding. In case of contact with eyes. Flush with plenty of clean water and seek medical advice. To remove splashes from extremes of temperatures Store in a cool and dry place but also prevent from freezing. Close container tightly after each use. Keep out of reach of children. In case of an accident, collect spillage using sand or earth. Adipose paint waste by appropriate environmental quality requirements.

 

SURFACE PREPARATION

New, bare, old previously painted surfaces must be clean, dry, and free from dust wax. Clean the surface by rubbing it down with abrasive paper. Brush down the previously painted surface completely and make the surface smooth. For large holes and cracks, use Helder Elastic Filler. Apply Helder Wall Primer to seal the surface from water and salt. Allow the surface to dry completely. Then apply Helder Putty for leveling the surface after some time. Rub-down the surface with abrasive paper and dust off. Now the surface will be smooth and ready for Helder Interior, Exterior Paint plus Emulsion.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Helder Interior, Exterior Paint Plus”

Your email address will not be published. Required fields are marked *