fbpx

Shop

Helder Interior Exterior Paint Plus
Helder Interior, Exterior Paint Plus
January 8, 2022

Helder Interior Exterior Wall Putty Plus

Helder Interior Exterior Wall Putty Plus is High solids water-based 100% Acrylic, for Interior, Exterior Wall putty Plus. It is suitable for the preparation of base of Especially Exterior masonry surfaces such as brickwork, plaster, and cement rendering to fill pores and imperfections. If you apply the solution properly, fill the cracks, imperfections, and gaps in the wall to create an even base for your paint. The wall putty is used for filling holes, minor cracks, etc. on the wall surfaces. Applying putty on the walls before painting them can give an even and smooth canvas for professional painters to paint on. It is also applied before the final paint so that the life of the paint gets increased.

 

Application System

Application Method:      Putty Applicator

Thinner:                             Water

No. of Coats:                     2 to 3 Layers

Cleaning:                            Clean all equipment with water

Category:
Description

HELDER WALL PUTTY HEALTH AND SAFETY ENVIRONMENT INFORMATION

GENERAL INFORMATION

Remove affected person from source of contamination. Get medical attention immediately!

INHALATION

Move injured person into fresh air immediately. Call an ambulance. Be aware that symptoms of lung edema (shortness of breath) may develop up to 24 hours after exposure. Bring these instructions. Place the unconscious person on the side in the recovery position and ensure breathing can take place.

INGESTION

Immediately rinse your mouth and drink plenty of water or milk. Keep person under observation. Do not induce vomiting. If vomiting occurs, keep your head low. Transport immediately to the hospital and take these instructions.

SKIN CONTACT

Remove contaminated clothing immediately and wash skin with soap and water. Consult a physician for specific advice. Burns: Flush with water immediately. While flushing, remove clothes that do not adhere to the affected area. Call an ambulance. Continue flushing during transport to the hospital.

EYE CONTACT

Immediately flush with plenty of water for up to 15 minutes. Remove any contact lenses and open eyes wide apart. Immediately transport to Hospital or eye specialist.

SURFACE PREPARATION

The surface must be clean, dry, and free from efflorescent salts. Prime with HELDER Exterior Primer and prepare the base with HELDER Interior Exterior Wall Putty Plus with a very thin base. Thoroughly clean surface Remove all defective or poorly adhering material by rubbing down using a suitable abrasive paper and dust off. Prime with Exterior Primer and prepare the base with HELDER Interior Exterior Wall Putty Plus where needed.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Helder Interior Exterior Wall Putty Plus”

Your email address will not be published. Required fields are marked *